Mercedes, Mazda, Mitsubishi Head units pinouts  > Mercedes pinouts

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

BAT Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
KL.15 Ignition powered. +12 V with the ignition key is in the ACC or ON position.
iLLUM Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on.
ANT OUT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

MUTE This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
GAL This pin is used in some radio equipment to automatically boost up the volume. It needs the output from the speed sensor.
CAN-L, CAN-H CAN on board diagnostic bus
K-Line K-line on board diagnostic bus

 

42 pin (8+8+18+8) Mercedes Comand ISO / proprietary of Mercedes Benz COMAND W 163 connector layout
42 pin (8+8+18+8) Mercedes Comand ISO / proprietary connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Mercedes Benz COMAND W 163 visual pinout:
Mercedes Benz COMAND W 163 diagram
click to enlarge
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.