Automotive Head units pinouts  > Pioneer pinouts

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

B+, BAT, Bup+, Ub+, B-U, MEM +12, KL.30 Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
A+, ACC, S-K, S-kont, SWA, KL.15 Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL, LAMP, Lume, iLLUM, lightbulb image Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT+, P.ANT, ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 
__/ +--- Switched power out

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

MUTE, Mut, mu, TEL, TEL MUTE, strikeout speaker This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
GALA,GAL, GA, SCV, SDV This pin is used in some radio equipment to automatically boost up the volume. It needs the output from the speed sensor.
16 pin Kenwood proprietary of Pioneer AVX-P7300 connector layout
16 pin Kenwood proprietary connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.