Pinouts >  Различные устройства  >  Digi pinouts
10 pin RJ50 (10P10C) male connector layout
Разъем 10 pin RJ50 (10P10C) male


The Digi PortServer TS is always a DTE device, asserting TxD, DTR, and RTS while monitoring RxD, DSR, CTS, DCD, and RI from the remote DCE device.

Pin
Number
Pin
Name
Description (may be empty)
1 RI  Ring Indicator
2 DSR  Data Set Ready
3 RTS  Request to Send
4 CGND  Chassis Ground*
5 TxD  Transmit Data
6 RxD  Receive Data
7 SGND  Signal Ground*
8 CTS  Clear to Send
9 DTR  Data Terminal Ready
10 DCD  Data Carrier Detect

*While the Digi user guide offers no expansion for either the CGND or SGND acronym labels, other Digi manuals make reference both to a CGND bonded to a connector shell or chassis and a separate and distinct signal ground, allowing confident assumption of these descriptions. Furthermore, continuity testing performed on a bare PortServer TS 4 MEI showed no discernable difference between the CGND and SGND pins as measured from the metal chassis.

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Источник(и) этой и дополнительной информации: http://ftp1.digi.com/support/documentation/90000583_G1.pdf, page 109 of the Digi One and PortServer TS Family user guide
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.