Pinouts >  Разъемы гарнитур и наушников и т.д.  >  Nokia pinouts
4 pin 3.5mm (2.5mm) plug connector layout
Разъем 4 pin 3.5mm (2.5mm) plug
This headphone from nokia comes with N97 mini,N97 and others new phones

 

 

Pin
Number
Pin
Name
Description
1 TIP Left Audio (green wire)
2 RING Right Audio (red wire)
3 RING Microphone (white wire hidden in between the copper wire)
4 SLEEVE Common (blue,red/blue and gold wire)

The wires blue, red/blue and gold are the common.

 

The blue wire is the common of the left audio

The red/blue is the common of the right audio

The gold wire is the common of the microphone

I did this with my headphone and works perfectly, even the buttons work too.

--------------------------------------------------------------------------------------------------------

Yep, works. Did this wiring and works on N8.

To be more specific about wiring:

Green is for left audio

Red is for right audio

White is for microphone

And the rest put them all together and they are the gnd. Even the gold wire that wraps the white one. So, gold+blue+red/blue is GND and goes to pin #4.

 --------------------------------------------------------------------------------------------------------

WH-701 second variant (original with phone N8).

Left A - red

Rigth A - blue

Microphone - green

Common - gold+gold/red

Work perfect!

-------------------------------------------------------------------------------------------

My WH-701 have Gold,Red/Green,Blue, Red, Green

¡_____________________

¡-----------/--------/---------/------

      4        3       2        1

Numer Pin Color 
1 Blue(Left)
2 Green(Right)
3 Red(Mic)
4 Gold+Red/Green
На распиновку Nokia WH-701 headphone/microfone 3.5mm jack connector есть 30 отзыв(а): 24 положительных и 3 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: Myself
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.