Pinouts of Audio / Video hardware connectors  > Philips pinouts


 

Pin
Number
Pin
Name
Description
1   NA

not connected

2   RXD

Received Data

3   TXD

Transmitted Data

4

DTR*

  Data Terminal Ready
5  GND   Ground
6   CTS   Clear to Send
7  RTS   Request to Send
8

+5V

 

*DTR is used as a power supply for some input devices and cannot be used as an active handshake signal.

8 pin mini-DIN male connector layout
8 pin mini-DIN male connector
at the End of controller
8 pin mini-DIN female connector layout
8 pin mini-DIN female connector
at the Cdi input
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Philips CD-i Controller pinout visual pinout:
Philips CD-i Controller pinout diagram
click to enlarge
Source(s) of this and additional information: http://www.icdia.co.uk/cdprosupport/hardware/cables/cdi_ser.htm
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.