Point Of Sale Devices: scanners, printers, cash registers cables and connectors pinouts  > Koamtac pinouts
KDC200 and others. Pins 1-4 on the USB A connector are connected to pins 1-4 on the UC-E6 connector. Pins 5-8 are not connected.

 

Pin
Number
Pin
Name
Description
1   USB +5V   
2

  USB Data-

  
3   USB Data+   
4   USB Ground   
5   NC   
6   Finger Trigger 2.2v Nominal. Pull to ground through 1k resistor.
7   NC   
8   NC   

 

8 pin UC-E6 like-mini-usb proprietary of Koamtac USB Barcode Scanner connector layout
8 pin UC-E6 like-mini-usb proprietary connector
at the Scanner
4 pin USB A plug connector layout
4 pin USB A plug connector
at the Computer
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.