LapLink/InterLink Parallel cable specification users reports and reviews |
Date | Content Revision |
User opinion | Comment | Approved by moderator? |
---|---|---|---|---|
CORRECT | APPROVED | |||
CORRECT | Verified pinout from laplink cable with breakout box and ohmmeter | APPROVED | ||
CORRECT | WinXP--WinXP direct cable connection work correctly | APPROVED | ||
2009-04-19 23:43:21 | rev. 1 | CORRECT | Direct cable connectio IBM PS/1 (Dos 4.00) -- Pentium 4 (Dos 6.22) fully working | APPROVED |
2010-10-15 01:36:59 | rev. 1 | CORRECT | Working using NC4 between XT PC and Sempron AM2 PC (DOS 5.0 on both). | APPROVED |
2011-11-27 03:40:15 | rev. 1 | CORRECT | No, correct pinout. I have an original Traveling Software Parallel LapLink cable and I tested it with my multimeter continuity function. | APPROVED |
2011-11-27 04:16:16 | rev. 1 | CORRECT | I have an old Touchstone (Trend) FastMove parallel (red color, not yellow like LapLink)cable that was used with the TouchStone software to move data on parallel Ports link LapLink. The pinout is identical to this pinout except it does not have pin 25 connected at all. Touchstone was old software from the late 1980's and early 1990's. You might want to add this for completeness on you site. | APPROVED |
Date | Content Revision |
Author | Comment |
---|
Pinouts.ru > Pinout of LapLink/InterLink Parallel cable and layout of 25 pin D-SUB male connector and 25 pin D-SUB male connector |
should be correct |