Hardware pinouts information and cables schemes

ATEN KVM Switches Firmware upgrade cable specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 12 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
2014-05-06 04:57:06rev. 2ERROR FIXEDthis is for the newest version of the CS-1754. I'd like to find the one for the 3/32 round plug for the Original CS-1754 model.APPROVED
2015-01-08 07:06:23rev. 3CORRECTThe pinout worked for me. HP "1 x 4 USB/PS2 KVM Switch" (same hardware as ATEN CS1734A?!) The GND Description in the table is wrong though. RS232(RJ11): 2=RxD(1), 3=TxD(2), 7=RTS(3), 5=GND(4)! APPROVED
2015-08-26 11:45:40rev. 3CORRECTworking with CS1716iAPPROVED
2015-08-27 10:14:42rev. 3CORRECTWorks with CS1768APPROVED
2015-09-21 07:10:10rev. 3CORRECTAPPROVED
2016-07-05 09:57:28rev. 3CORRECTAPPROVED
2017-01-10 02:32:30rev. 3CORRECTWork perfectly. ThanksAPPROVED
2017-10-03 10:56:30rev. 3CORRECTGND to GNDAPPROVED
2018-08-16 01:26:18rev. 3CORRECTWORKS PERFECTLYAPPROVED
2018-08-17 15:06:38rev. 3CORRECTAPPROVED
2018-09-03 07:52:44rev. 3CORRECTAPPROVED
2018-12-06 13:13:55rev. 3CORRECTwork on cl5716mAPPROVED


History of users contributions

Date Content
Revision
Author Comment

Back to ATEN KVM Switches Firmware upgrade cable pinout


Pinouts.ru > Pinout of ATEN KVM Switches Firmware upgrade cable
should be correct