Hardware pinouts information and cables schemes

Dell 180W DA-3/DA-2 OptiPlex Ultra Small Form Factor (USFF) Power Adapter specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 4 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
2015-07-09 22:04:54rev. 4CORRECTNoAPPROVED
2016-03-03 15:53:19rev. 4CORRECTpin 4 is reserved. System is expecting 12VDC 18A.APPROVED
2016-06-27 22:42:06rev. 5CORRECTAPPROVED
2016-11-30 07:47:10rev. 5ERROR FIXEDRe: Dell power supply D220P-01: Except that the diagramme and chart pinout on the web page are backwards compared to the diagramme on the nameplate on the power supply. The operative info is the line "Connecting the signal from PIN 8 to Ground will switch the Power on." When you realise that his Pin 8 (Signal) is really Pin 5 (Remote) then you can jumper 5-6 and the pilot light turns from orange to green and 12v appears on pins 2,3,4. (As indicated on the nameplate.)APPROVED


History of users contributions

Date Content
Revision
Author Comment
2015-04-28 11:10:16rev. 2MSG4REAL
2015-04-28 11:10:35rev. 4MSG4REALI have one in front of me and I used it as verification
2016-05-22 13:37:53rev. 5GabrielAdded sentence, that connecting PIN 8 to Ground switches the power suply on.

Back to Dell 180W DA-3/DA-2 OptiPlex Ultra Small Form Factor (USFF) Power Adapter pinout


Pinouts.ru > Pinout of Dell 180W DA-3/DA-2 OptiPlex Ultra Small Form Factor (USFF) Power Adapter
should be correct