Hardware pinouts information and cables schemes

Enttec DMX PRO MK2 specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 7 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
2015-02-05 02:11:56rev. 2CORRECTHello, thanks for schema 15pin Enttec Mk2Pro , tommorw i will build and test it. Thanks you for schema . Mirek SAPPROVED
2016-04-24 10:47:52rev. 2INCORRECTThere is one input missing. The DMX 1 input is not wired or shown in the drawing. APPROVED
2016-08-03 17:19:12rev. 2CORRECTReacting to "incorrect" feedback: DMX1 IN and DMX1 OUT are most probably wired in parallel to the same pins 11/12/13, since you can't use DMX1 IN and OUT simultaneously.APPROVED
2016-08-31 09:17:52rev. 2CORRECTAPPROVED
2018-02-03 21:42:31rev. 2CORRECTAPPROVED
2019-11-01 14:26:24rev. 2CORRECTAPPROVED
2022-08-23 13:31:19rev. 3ERROR FIXEDThe pin wiring of MIDI plugs (DIN5) mismatch with the official support documentation from ENTTEC (https://support.enttec.com/support/solutions/articles/101000395656-db-15-breakout) version: Thu, 11 Aug, 2022 at 11:41 PM. I don't tested any of this wirings. I only saw the differences.APPROVED


History of users contributions

Date Content
Revision
Author Comment

Back to Enttec DMX PRO MK2 pinout


Pinouts.ru > Pinout of Enttec DMX PRO MK2
should be correct