Hardware pinouts information and cables schemes

Volkswagen OBD II diagnostic connector specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 3 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
2010-08-23 12:11:13rev. 4ERROR FIXEDI have ever seen that, pin number 3 and 11 used as CAN high and CAN low. A lot of document of Volkswagen show that, ECU does not connect to Pin 3 and 11APPROVED
2017-12-01 08:26:27rev. 8ERROR FIXEDA visual inspection of the obd2 connector on my 2010 VW Crafter shows pin 1 ,4,5,6,14,16 have wires all others are not connectedAPPROVED
2017-12-02 21:52:29rev. 8CORRECTAPPROVED


History of users contributions

Date Content
Revision
Author Comment
2010-08-24 21:04:54rev. 4thuanckdPin number 3 and 11 not use
2015-10-04 21:51:21rev. 6lee edwardspin 5 signal ground bad earth
2015-10-04 22:54:47rev. 6

Back to Volkswagen OBD II diagnostic connector pinout


Pinouts.ru > Pinout of Volkswagen OBD II diagnostic connector
should be correct