Pinouts >  GM Opel, Chevrolet, Buick, Pontiac, Saturn, Cadillac car audio  >  Jeep pinouts

18 pin Car Stereo connector 

Cavity Wire color Function
1 Red / Orange AMPLIFIED LEFT FRONT DOOR SPEAKER (+)
2 Dark Green / Violet AMPLIFIED RIGHT FRONT DOOR SPEAKER (+)
3 Gray / Light Green AMPLIFIED LEFT REAR DOOR SPEAKER (+)
4 Dark Green / Light Green AMPLIFIED RIGHT REAR DOOR SPEAKER (+)
5 Gray / Brown AMPLIFIED SUBWOOFER (+)   (SRT8 Kicker amp only)
6 - - - -
7 Gray / Yellow AMPLIFIED LEFT FRONT DOOR SPEAKER (-)
8 Dark Green / Yellow AMPLIFIED RIGHT FRONT DOOR SPEAKER (-)
9 Gray / Dark Green AMPLIFIED LEFT REAR DOOR SPEAKER (-)
10 - - - -
11 - - - -
12 Light Green / Gray AMPLIFIED RIGHT REAR DOOR SPEAKER (-)
13 Dark Green / Brown AMPLIFIED SUBWOOFER (-)  (SRT8 Kicker amp only)
14 - - - -

20 pin Car Stereo connector 

Cavity Wire color Function
1 Gray / Orange AMPLIFIED LEFT I/P SPEAKER (+)
2 Gray / Dark Green AMPLIFIED RIGHT I/P SPEAKER (+)
3 - - Center channel (+)  (not used in the WK)
4 Yellow / Red FUSED B (+)
5 - - - -
6 White / Orange CAN B BUS (+)
7 Dark Green / Dark Blue LEFT REAR AUDIO (+)
8 Gray / Dark Blue RIGHT REAR AUDIO (+)
9 Black / Light Green GROUND
10 Gray / Yellow AMPLIFIED LEFT I/P SPEAKER (-)
11 Gray / Light Green AMPLIFIED RIGHT I/P SPEAKER (-)
12 - - Center channel (-)  (not used in the WK)
13 Yellow / Red FUSED B (+)
14 - - - -
15 - - - -
16 - - - -
17 White CAN B BUS (-)
18 Dark Green / Violet LEFT REAR AUDIO (-)
19 Gray / Tan RIGHT REAR AUDIO (-)
20 Black / Light Green GROUND

 

14 pins unspecified connector layout
14 pins unspecified connector
at the car stereo
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
This page contain parts under Copyright © 2000-2019 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.