Mitsubishi MMCS NR-242WM-16KZN0 W-15 Head Unit распиновка и описание @ pinouts.ru

at the car stereo

p/n 8750A569, 8750A567 (NR-242RM-16KZN0). Also for Lancer, ASX, Pajero, Pajero Sport, Citroen C-Crosser и AirCross, Peugeot 4007 и 4008

Terminal No.	Check item	Check condition	Terminal voltage
1	ACCESSORY (+)	Ignition switch: ACC position	System voltage (DC)
2	REMOCON	Ignition switch: ACC position	3.3 V (DC)
5	SPEAKER RR (+)	When the sound is output	0 - System voltage (AC)
6	SPEAKER FR (+)	When the sound is output	0 - System voltage (AC)
7	SPEAKER RL (+)	When the sound is output	0 - System voltage (AC)
8	SPEAKER FL (+)	When the sound is output	0 - System voltage (AC)
9	ILLUMINATION (+)	Tail lamp switch: ON	System voltage (DC)
10	BATTERY (+)	Always	System voltage (DC)
11	VEHICLE SPEED PULSE	Ignition switch: ON	0 - System voltage (pulse)
12	REMOCON GND	Always	1 V or less
14	ANTENNA +B	Ignition switch: ACC position	System voltage (DC)
15	SPEAKER RR (-)	When the sound is output	0 - System voltage (AC)
16	SPEAKER FR (-)	When the sound is output	0 - System voltage (AC)
17	SPEAKER RL (-)	When the sound is output	0 - System voltage (AC)
18	SPEAKER FL (-)	When the sound is output	0 - System voltage (AC)
19	ILLUMINATION (-)	Always	1 V or less
20	GND	Always	1 V or less

some terminals may be not connected - depending on model

Terminal No.	Check item	Check condition	Terminal voltage
21	AUX/RSES INPUT RIGHT	When the sound is input from audio and video adapter/rear display unit	1.2 Vrms (AC)
22	AUX/RSES INPUT LEFT	When the sound is input from audio and video adapter/rear display unit	1.2 Vrms (AC)
23	HFM/USB S-INPUT RIGHT	When the hands-free interface system/USB device operation	1.2 Vrms (AC)
24	HFM/USB S-INPUT LEFT	When the hands-free interface system/USB device operation	1.2 Vrms (AC)
25	Tel Input ?	-	-
26	IE-BUS INPUT RIGHT (+) (DUBTuner)
27	IE-BUS INPUT LEFT (+) (DUB Tuner)
28	IE-BUS POWER ON	Ignition switch: ACC position	1 V or less
29	IE-BUS (+)	Ignition switch: ACC position	More than 120 mV
30	AUX/RSES INPUT GND	Always	1 V or less
31	AUX/RSES/HFM/USB SHIELD	-	-
32	HFM/USB INPUT GND	When the hands-free interface system/USB device operation	1.2 Vrms (AC)
33	Tel Input GND?
34	Tel Mute
35	IE-BUS INPUT RIGHT (-) (DUBTuner)
36	IE-BUS INPUT LEFT (-) (DUB Tuner)
38	IE-BUS (-)	Ignition switch: ACC position	More than 120 mV

some terminals may be not connected - depending on model

Terminal No.	Check item	Check condition	Terminal voltage
41	VCC	Ignition switch: ON position Selector lever: R position	5.8 - 7.0 V (DC)
42	CAMERA DETECT	Ignition switch: ON position Selector lever: R position	0 - 5 V (DC)
43	PS-R	Ignition switch: ON position Selector lever: R position	System voltage (DC)
44	BATTERY (+)	Always	System voltage (DC)
45	GND	Always	1 V or less
46	CAMERA SIGNAL	Ignition switch: ON position Selector lever: R position	1 Vp-p (AC)
47	SHIELD (CAMERA)	Always	1 V or less
48	GND	Always	1 V or less

some terminals may be not connected - depending on model

Terminal No.	item	condition	Terminal voltage
51	CAN BOX DATA TX	Ignition switch: ACC position	5V (DC)
52	SHIELD (CAN BOX DATA)
53	VIDEO INPUT	When the image is input from audio and video adapter	1 Vp-p (AC)
54	VIDEO DETECT	Always	1 V or less
56	SHIELD (MIC)
57	MIC DETECT
58	HFM MIC OUT
59	CAN BOX DATA RX		2 - System voltage(DC)
60	CAN BOX DATA CLX		1-5V (DC)
61	SHIELD (VIDEO INPUT)	Always	1 V or less
63	MIC GND	-	-
64	MIC SIGNAL
65	SHIELD (HFM MIC OUT)
66	HFM MIC OUT GND

Terminal No.	item	Check condition	Terminal voltage
73	Camera image OFF switch signal	Ignition switch: ON position; Camera switch: ON	1 V or less
74	Camera Switch Signal	Ignition switch: ON position; Camera switch: ON	1 V or less
75	Image output request	Ignition switch: ON position; When the camera image is displayed	1 V or less
75	Image output request	Ignition switch: ON position; When the camera image is not displayed	4 V or more

Pins not mentioned are not connected.

CAN BOX UNIT

Terminal No.	Signal symbol	Check item	Check condition	Terminal voltage
1	+B	BATTERY (+)	Always	System voltage (DC)
2	TX-C	TX (AND)	Ignition switch: ACC position	0 - 5V (DC)
3	RX-C	RX (AND)	Ignition switch: ACC position	2 - System voltage(DC)
6	ACC	ACCESSORY	Ignition switch: ACC position	System voltage (DC)
7	GND	GND	Always	1 V or less
8	SH-C	SHIELD (CAN BOX DATA)	Always	1 V or less
9	CK-C	CAN BOX DATA CLK	Ignition switch: ACC position	1 - 5V (DC)
13	CAN-	CAN-L
14	CAN+	CAN-H