Pinouts >  OEM Lexus and Toyota in-Car Radio and Navigation units  >  Toyota Land Cruiser pinouts
20 pin Toyota Head Unit audio connector layout
20 pin Toyota Head Unit audio connector
p/n 86120-60510

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

BU, +B Battery+  (12V direct from Battery). 
GND, GROUND, SLD1 Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

MUTE This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
Amp Amplifier control
RSR+.RSR-,RSL+, RSL- Audio Signal to Rear Audio Controller, For Wireless Headphones
TX+, TX- Display communication??
SW1 Seek+/-, Vol+/- Inputs from Steering wheel audio controls
SW2 Mode input from Steering wheel audio controls
RMU Mute Signal to Rear Audio Controller, Logical 1 when Radio Switch is On
12 pin Toyota/Lexus Head Unit proprietary connector layout
12 pin Toyota/Lexus Head Unit proprietary connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.