Toyota RAV4 (2006-2011) JBL Head Unit распиновка и описание @ pinouts.ru

at the head unit

p/n 86120-42320 (id 51876), 86120-0R090 (id A51880) ??

Connector A

Pin Num	W/C	Pin Name	Signal
1	L	B+	Battery
2	G	ILL+	Illumination signal
5	R	ATX+	AVC-LAN communication signal
7	P	MUTED	Mute signal
8	B	R+	Sound signal (right)
9	R	L+	Sound signal (left)
10			shield
11	GR	ACC	ACC power supply
12	BR	ILL-	Illumination signal
13	B	ANT	Power source ofantenna
15	G	ATX-	AVC-LAN communication signal
18	W	R-	Sound signal (right)
19	G	L-	Sound signal (left)
20	BR	GND	Ground

W/C stands for Wire Color. It is for Rav4 2011 and is very dependent on model and model year.

Connector D

Pin Num	W/C	Pin Name	Signal
1	W-B	SNS2	Ground
2	W	MIN+	Microphone voice signal
3	B	MACC	Microphone AMP power supply (5V)
5	R	MIN-	Microphone voice signal
6		SGND	shield

W/C stands for Wire Color. It is for Rav4 2011 and is very dependent on model and model year.

Connector H

Pin Num	W/C	Pin Name	Signal
3	V	SPD	Speed signal fromcombination meter
6	B	SWG	Steering pad switch signal ground
7	W	SW1	Steering pad switch signal Steering pad switch not pushed 4 V or more Steering pad switch SEEK+ switch pushed Approx. 0.5 V Steering pad switch SEEK- switch pushed Approx. 0.9 V Steering pad switch VOL+ switch pushed Approx. 2.0 V Steering pad switch VOL- switch pushed Approx. 3.4 V
8	R	SW2	Steering pad switch signal Steering pad switch not pushed 4 V or more Steering pad switch MODE switch pushed Below 0.5 V Steering pad switch ON HOOK switch pushed Approx. 0.9 V Steering pad switch OFF HOOK switch pushed Approx. 2.0 V Steering pad switch VOICE switch pushed Approx. 3.4 V
11	B	IVO+	Voice signal
12	W	IVO-	Voice signal
13		SLD1	shield
15	W	ARI	Sound signal (right)
16	R	ASGN	Ground
17	B	ALI	Sound signal (left)
18		AGND	shield
19	R	AUXI	External input connection detection signal