Automotive Head units  > Alpine pinouts

Abbreviations of head unit pinouts

Pin function

Power pins

B+   Battery+  (12V direct from Battery). Connects the radio directly to the battery.
GND   Chassis Ground
A+   Ignition powered. +12V Main Power (Switched via Ignition key). +12 V with the ignition key is in the ACC or ON position.
ANT+   Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+  Front right audio out
LF+   Front left audio out
RR+   Rear right audio out
LR+   Rear left audio out
FR-, RF-, FL-, LF-, RR-, LR-, RL-   The corresponding audio ground

Misc. pins

Amp Amplifier control
16 pin 2x8 unspecified proprietary of Alpine TDE-7823W connector layout
16 pin 2x8 unspecified proprietary connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Alpine TDE-7823W visual pinout:
Alpine TDE-7823W diagram
click to enlarge
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.