Pinouts >  Диагностические интерфейсы легковых автомобилей, мотоциклов и грузовиков  >  Iveco pinouts
30 pin IVECO diagnostic connector layout
30 pin IVECO diagnostic connector
should work with Iveco Eurocargo, Eurostar, Eurotech, Eurotrakker, Cursor, Stralis. Also for Laverda trucks

 

Pin
Number
Protocol Function Cable code
1   ISO-L   ECM or EDC 1198,2298
2   ISO-K 2500
3   ISO-L   ABS/ASR or EBS 1199
4   ISO-K   ABS/ASR or EBS Tachograph 2299
5   ISO-L    INTARDER ZF or TELMA Retarder 1193
6   ISO-K 2293
7   ISO-L   VBC or SIB 1190
8   ISO-K 2303
9   ISO-L   Kneeling,   SPR1 or EBERSPEACHER heater 1194
10   ISO-K 2294
11   +15   Wiring of operating modes KL 15 7731
12   ISO-K   VCM, immobilizer 2503
13   ISO-L    Webasto heater or VALEO climate  
14   ISO-K 2295
15   ISO-L    DCU, ECAS  
16   ISO-K 2501
17   ISO-L     VOITH DIWA 5, EUROTRONIC/ALLISON 1197
18   ISO-K 2297
19   EOL EUROTRONIC   may be N/C 7079,3397
20   EOL INTARDER/EDCM7   may be N/C 3393
21   CAN-H   Wiring H VDB - SPR1 6110
22   CAN-L   Wiring L VDB - SPR1 6111
23   BMT sync   BMT engine sync signal or NC 5198
24      shielding  
25   Engine start   Engine start signal or N/C  
26   Engine start   Engine start signal or N/C  
27   Plus pole   Battery+ KL.30 7616
28   RPM   Engine speed 5584
29   Tachograph   Speed signal by the tachograph 5540 or 8840
30   Negative pole   Ground 0000

May be

27 RPM signal
28 speed signal
29 -minus
30 +plus battery, circuit 30

???

На распиновку Iveco 30-pole diagnostic connector есть 2 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
Copyright © 2000-2021 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.