Pinouts >  Mobile Phones and Smartphones connectors  >  Motorola pinouts
17 pin Motorola V60 cell phone proprietary connector layout
17 pin Motorola V60 cell phone proprietary connector
also for ROKR E1, E398,E550,E815,E1000, T280,T720,T730,T722i,T721, 270c, C331t, C343, C353t, C975, C980, 120x, A920, A295, Nextel i205, i305, i530, i730, i830, i930 models. This interface also known as Motorola CE bus.
Mobile phone interface pin Description
1 GND
2 R=25 or 33 KOhm to GND in data or charge cable
3 +6v charge voltage
4 Tx
5 Rx
6 RTS
7 Vbus (connect to pin 3 if not used as IC power)
8 CTS
9 DCD
10 RI
11 DTR
12 DSR
13 Serial Enable (if this pin is not pulled to ground your serial cable will not work)

Pins 6,8; pins 13 and 1 should be shorted in cable.

USB pinout (used at least in Motorola Nextel i205, i305, i530, i730, i830, i930).

Mobile phone interface pin Description
1 GND
4 Rx (may be connected to PC USB port, USB D+)
5 Tx (may be connected to PC USB port, USB D-)
6 VBus May be pin 7???

For v600 whith charge, pin 3 and 6 be shorted. USB D+ connect to pin4, USB D- connect to pin5. R=25 KOhm connect to pin1 and pin2. Do not pin 3 and 6 shorted in phone, must be in cable!

 

According to 12 reports in our database (9 positive and 2 negative) the Motorola A630,A835,A845,A1000, i205,i305,i530,i830,i860,i710,i730,i733,i736,i836,i930, V120,V265,V262,V260,V276,V300,V400,V500,V505,V551,V525,V545,V547, V550,V600,V620,v60t,V60,V60i,V60p,V60s,V66,V70,V710,V800,V80,V950,V980,V975,V1050 cell phones cable connector pinout should be correct.

Is this pinout
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.