Pinouts >  Разъемы сотовых телефонов и смартфонов
standard micro-usb cable
Для этой рспиновки есть 368 совместимых устройств. Показать>

While many currently available devices and cables still use Mini-USB plugs, the Micro-USB connectors are widely adopted and most widely used. The thinner micro connectors replaced the Mini plugs in new devices including smartphones, personal digital assistants, and cameras.  The cellular phone carrier group, Open Mobile Terminal Platform (OMTP)  endorsed Micro-USB as the standard connector for data and power on mobile devices, and in  2009 it was accepted by almost all cell phone manufacturers as the standard charging port. Nowdays Micro-USB connector  start to superseed by USB type-C connector.

Pin Name Cable color Description
1 VCC Red +5 VDC
2 D- White Data -
3 D+ Green Data +
4 ID   May be N/C, GND or used as an attached device presence indicator (shorted to GND with resistor)
5 GND Black Ground

USB pinout signals

USB is a serial bus. It uses 4 shielded wires: two for power (+5v & GND) and two for differential data signals (labelled as D+ and D- in pinout). NRZI (Non Return to Zero Invert) encoding scheme used to send data with a sync field to synchronise the host and receiver clocks. In USB data cable Data+ and Data- signals are transmitted on a twisted pair. No termination needed. Half-duplex differential signaling helps to combat the effects of electromagnetic noise on longer lines. Contrary to popular belief, D+ and D- operate together; they are not separate simplex connections.

5 pin Micro-USB Type A, Type B receptacle схематический вид разъема
Разъем 5 pin Micro-USB Type A, Type B receptacle
at the host
На эту распиновку есть 5 отзыв(а): 5 положительных и 0 отрицательных.

Эта распиновка
This page contain parts under Copyright © 2000-2019 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.