Pinouts >  Интерфейсы цифровых видео и фотокамер  >  Olympus pinouts
12 pin Olympus proprietary plug схематический вид разъема
Разъем 12 pin Olympus proprietary plug
at the plug at the cable
should also work with C-5500 Sport Zoom, C-7000 Zoom, D-425, D-435, D-545 Zoom, D-595 Zoom, D-630 Zoom Evolt E-330, Evolt E-500, FE-140, FE-130, FE-120, SP-310, SP-320, SP-350, SP-500Z, SP-500 UZ, SP-700 Stylus Digital 500, Stylus Digital 600, Stylus Digital 700, Stylus Digital 710, Stylus Digital 720 SW, Stylus Digital 800 Stylus 810, Stylus Verve, Stylus Verve S

Olympus connector pinout:

Pin
Number
Pin
Name
Description
1 USB D+  
2 USB D-  
3 AUDIO OUT mono
4 SHUTTER  
5 VIDEO OUT  
6 GROUND  
7 USB +5V  
8 FOCUS  
9 USB GND  
10 GND  
11 Video GND  
12 enable video output pull to ground to activate
shell GND  

The video out is composite video.

The shutter and focus inputs operate these functions identically to pressing the button on the camera itself. Connect to ground to operate.

Pin 12 enables video output. When pulled low the main camera display is shut off and composite video is output. (It does not seem possible to have both video out and camera display active simultaneously, at least not on the E-P1 tested.) Tested on Olympus E-P1 firmware version 1.0. When pin 12 is left unconnected the camera pulled it to around 3.2V while on.

Olympus USB cable scheme:

photo C-70Z Pin
Name
C-70Z Pin
Number
Direction PC Pin
Number
PC Pin
Name
Description
GND 9 --- 4 GND  
D+ 2 --- 2

D+

 
D- 1 --- 3 D-  
Vcc 7 --- 1 Vcc  

 


 

 

4 pin USB A plug схематический вид разъема
Разъем 4 pin USB A plug
at the computer
На эту распиновку есть 8 отзыв(а): 5 положительных и 1 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: , http://www.doc-diy.net/photo/remote_pinout/
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.