Pinouts >  Интерфейсы цифровых видео и фотокамер  >  Sony pinouts
9 pin D-SUB male connector layout
Разъем 9 pin D-SUB male
at the cable
he Sony 9-Pin Protocol or P1 protocol is a two-way communications protocol to control advanced video recorders. It uses an RS-422 D-sub 9-pin connector, where bi-direction communication takes place over a four wire cable.

Interface is based on RS-422 specifications. 

Pin
Number

Pin
Name
(master)

 Pin
Name
(slave)
1   Frame ground   Frame ground
2   Receive A   Transmit A
3   Transmit B   Receive B
4   Transmit common   Receive common
5   Spare or ground   Spare or ground
6   Receive common   Transmit common
7   Receive B   Transmit B
8   Transmit A   Receive A
9   Frame ground   Frame ground

 Pins 2 and 7 form a pair and must be twisted together on long runs.

 Pins 3 and 8 form a pair and must be twisted together on long runs.

 

Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: https://en.wikipedia.org/wiki/9-Pin_Protocol, http://www.belle-nuit.com/archives/9pin.html
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.