Pinouts >  Распиновки разъемов винчестеров других устройств хранения информации
13 pin (7+6) SATA Slimline connector layout
13 pin (7+6) SATA Slimline connector

The slimline connector is defined in SATA 2.6 specification and intended for smaller form-factors such as notebook optical drives. Pin 8 of the slimline power connector, denoting device presence, is shorter than the others to allow hot-swapping. The slimline signal connector is identical and compatible with the standard version, while the power connector is reduced to six pins so it supplies only +5 V, and not +12 V or +3.3 V.

SATA Slimline pinout diagram

Pin Name Function
1 GND Ground
2 A+ Transmit+
3 A- Transmit-
4 GND Ground
5 B- Receive-
6 B+ Receive+
7 GND Ground
     
8 DP Device Presence
9 +5V 5V Power
10 +5V 5V Power
11 M Manufacturer diagnostic
12 GND Ground
13 GND Ground
На распиновку SATA Slimline connector есть 8 отзыв(а): 8 положительных и 0 отрицательных.

Эта распиновка
Copyright © 2000-2021 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.