Pinouts >  Распиновки разъемов кабелей питания компьютера  >  HP pinouts
For HP Pavilion Slimline home PC s7210n, 220n, s7310n, s7320n, s7410n, s7420n, s7421c, s7400n, s7415c, s7500n, s7510n, s7515x, s7520n, s7527c, s7530n, s7500y, s7540a, s7500e, s7520kr, s7517c, s7600y, s7520la, s7600e, s7521k, s7545a, s7600n, s7605n, s7617c, s7620n, s7627c, s7612n, s7550d, s7620la, s7525a, s7640la, s7613w, s7603w, s7531kr, s7700n, s7727c, s7700y, s7700e, s7740LA, s7720LA, s7541kr, s7712n, s7713w; HP GC659AAR, GC665AA, GC665AA#ABA, GG787AAR, GJ474AA#ABA, GJ474UAR, GN566AA#ABA, GN567AA, GN567AAABA, GS221AV, GX615AA, GX616AA, KE624AA, Pav S3020n Pav S3100n, Pav S3120n, Pav s3123w, Pav s3200n, Pav s3220n, Pavilion s3200z, RX890AA, RX890AAR, RY882AAR, RZ389AAR, S3023w, s3127c, S3300F, S3320F, S3330F, S3330PC. HP PSU P/N 5188-2755, DPS-108DB-1A.

 looking at wiring side of PSU connector. Locking tab to LEFT as held

Signal Wire colour Wire colour Signal
+3.3VDC Standby

ORANGE
/BROWN

ORANGE  +3.3VDC
-12VDC BLUE ORANGE  +3.3VDC
Ground/Earth BLACK BLACK    Ground/Earth
Power ON GREEN RED  +5VDC
Ground/Earth BLACK   BLACK    Ground/Earth
Ground/Earth BLACK RED  
Ground/Earth BLACK BLACK  Ground/Earth
  --- GREY  Power GOOD
+5VDC RED VIOLET  +5VDC Standby
+5VDC RED YELLOW  +12VDC
+5VDC RED YELLOW  +12VDC
Ground/Earth BLACK ORANGE +3.3VDC 

 

 

 

Power Supply: Delta electronics M/N DPS-108BD-1A, Rev. 01F. HP P/N 5188-2755. 108W Max output; +3.3VDC/+5VDC rails combined 83W Max. +5VDC/+12DC rails combined 97W Max. Rails:
+12VDC @ 6A
-12VDC @ 0.1A
+5VDC @ 12A
+3.3VDC @ 7A
+5VDC SB @ 1.5A
 

 

24 pin Molex 43025-2400 Micro-Fit схематический вид разъема
Разъем 24 pin Molex 43025-2400 Micro-Fit
at the PSU cable (not sure about notches shape matching)
На эту распиновку есть 1 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.