|
SCART specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| CORRECT | APPROVED | |||
| CORRECT | APPROVED | |||
| 2008-09-14 19:54:38 | rev. 2 | CORRECT | APPROVED | |
| 2009-09-14 16:22:53 | rev. 2 | CORRECT | APPROVED | |
| 2010-02-07 10:02:24 | rev. 2 | CORRECT | Pin 17 is ground for pins 19 and 20, composite video or S-video luminance. Pin 18 is ground for pins 8 and 16. Pins 17-17 and 18-18 conections seem obvious choices. Connection 17-18 is true ? Mixing grounds isn't generating problems? | APPROVED |
| 2011-10-30 00:55:51 | rev. 6 | CORRECT | RGB blanking is described, but RGB Sync is not. Add this info please. | APPROVED |
| 2012-03-23 22:06:34 | rev. 7 | CORRECT | APPROVED | |
| 2012-06-22 21:08:15 | rev. 7 | CORRECT | APPROVED | |
| 2012-07-25 21:56:53 | rev. 7 | CORRECT | APPROVED | |
| 2012-08-17 13:54:44 | rev. 7 | CORRECT | No | APPROVED |
| 2014-01-26 18:03:52 | rev. 7 | CORRECT | APPROVED | |
| 2016-08-27 14:06:14 | rev. 8 | CORRECT | Excellent! After over 40 years of Electronics Engineering, I tend to forget some things! Many Thanks And Kind Regards. Neil. | APPROVED |
| 2020-03-23 01:40:30 | rev. 9 | CORRECT | APPROVED | |
| 2023-06-18 01:52:45 | rev. 10 | INCORRECT | SCART to Composite Video cable 18 Composite video return should be 17, because 18 is blanking GND (for pins 8, 16), but probably it is the same ground - just for correctness. | APPROVED |
| 2023-12-17 23:28:58 | rev. 10 | CORRECT | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|---|---|---|
| 2010-02-27 22:20:40 | rev. 3 | Virgil Peiulescu | Pin 17 - ground for composite video or for S-video luminance ; Pin 18 - ground for "slow" (pin 8), and "fast" (pin 16) switching; Question : Pins 17-17 conection and eventualy 18-18 are mandatory, aren't they? Why connect pin 17 to pin 18? |
| 2011-11-24 21:15:57 | rev. 7 | Not absolutely sure but since it works it's probably correct. |
Pinouts.ru > Pinout of SCART (Peritel; Euroconnector) and layout of 21 pin SCART female connector and 21 pin SCART male connector |
should be correct |