|
Apple Lightning connector specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| 2013-09-18 22:34:33 | rev. 3 | CORRECT | there is no error, but this information is very poor . I need more, because I want to use this port | APPROVED |
| 2014-06-09 18:00:38 | rev. 4 | CORRECT | APPROVED | |
| 2014-08-05 15:10:30 | rev. 4 | CORRECT | Two differential pair lanes (L0p/n and L1p/n) may swap in IC of device connector (lanes don't swap if accessory identification chip connect to ID0 pin) also you don't want to swap out cables with another iPID0 pin) also you don't want to swap out cables with another iPhone/iPad user as there seems to be memory issues if you do; your device will no longer charge w/ the shared Lightning Cable. | APPROVED |
| 2015-08-21 20:27:38 | rev. 4 | CORRECT | none | APPROVED |
| 2015-10-12 14:45:39 | rev. 4 | INCORRECT | APPROVED | |
| 2016-06-09 22:29:22 | rev. 4 | CORRECT | APPROVED | |
| 2017-02-13 19:19:26 | rev. 4 | CORRECT | You may want to note that there has to be a 2V DC power source down the ID rail for the connections to transfer data | APPROVED |
| 2017-10-05 08:45:11 | rev. 4 | INCORRECT | Based on the diagram of the sequence of pins showed on the page, the actual pin-out is reversed. | APPROVED |
| 2017-10-19 20:23:57 | rev. 4 | CORRECT | APPROVED | |
| 2017-11-25 12:38:38 | rev. 4 | CORRECT | no the article is completely correct | APPROVED |
| 2018-05-10 01:48:48 | rev. 4 | CORRECT | APPROVED | |
| 2018-05-22 01:57:25 | rev. 4 | INCORRECT | Pin 1 and pin 8 need to be reversed on your image, but all others are correctly identified and labeled. | APPROVED |
| 2018-10-18 05:43:59 | rev. 4 | CORRECT | APPROVED | |
| 2019-08-13 20:10:56 | rev. 4 | CORRECT | APPROVED | |
| 2019-09-05 20:44:57 | rev. 4 | INCORRECT | I have just measured a connector and believe pin 1 is on the left | APPROVED |
| 2020-03-31 13:26:18 | rev. 4 | INCORRECT | didn't work this pinout. | APPROVED |
| 2020-08-25 23:52:00 | rev. 4 | INCORRECT | The pins are numbered backwards on the connector pic. Should be 1-8 instead of 8-1. I just verified by testing the power with a voltmeter. | APPROVED |
| 2021-02-06 13:16:26 | rev. 4 | INCORRECT | I believe the pin numbers are backwards. | APPROVED |
| 2024-04-02 22:20:00 | rev. 5 | ERROR FIXED | The picture shows the top side of the connector and so the numbering is reversed | APPROVED |
| 2024-07-10 00:40:02 | rev. 5 | ERROR FIXED | The diagram pinout numbering is reversed | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|
Pinouts.ru > Pinout of Apple Lightning connector |
should be correct |