Hardware pinouts information and cables schemes

SAE J1939 9 pin deutsch connector adapter specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 8 approved reports in our database

Date Content
User opinion Comment Approved by moderator?
2010-03-04 20:22:55rev. 4INCORRECTDB 9 connector is totally wrong Pin 2 is CAN low Pin 7 is CAN Hi Pin 5 is CAN shieldAPPROVED
2010-04-25 18:16:05rev. 4CORRECTAPPROVED
2011-11-18 03:12:33rev. 5ERROR FIXEDPin E is Shield Pin F is ATA+ Pin G is ATA- Pin J is missing from tableAPPROVED
2012-01-27 22:06:15rev. 5INCORRECTWhat about this pin out is incorrect?APPROVED
2012-03-07 00:52:58rev. 5CORRECTAPPROVED
2014-05-24 10:55:04rev. 5CORRECTAPPROVED
2021-03-02 23:44:49rev. 7CORRECTpinouts correct according to National Instruments NI9862 and NI9853 9 pin D-Sub pin assignments.APPROVED
2023-01-11 15:39:26rev. 7CORRECTCorrect!APPROVED

History of users contributions

Date Content
Author Comment
2011-10-04 22:35:19rev. 5Dave MorganPin assignments for DB 9 don't agree with new source link; Edited table above.

Back to SAE J1939 9 pin deutsch connector adapter pinout

Pinouts.ru > Pinout of J1932 9 pin deutsch to DB9 Serial cable
should be correct