Hardware pinouts information and cables schemes

Micro-USB 2.0 connector specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 63 approved reports in our database

Date Content
User opinion Comment Approved by moderator?
2011-09-17 10:06:36rev. 1CORRECTAPPROVED
2011-10-19 19:55:55rev. 1CORRECTNo errors at all. This type of connector works with the ZTE Blade. Charger (700mA) is signaled by shorting D-/D+ together at the USB A socket. In USB mode, the handset current draw is limited to within 500mA.APPROVED
2011-12-16 18:02:47rev. 1CORRECTAPPROVED
2012-01-05 04:59:24rev. 1CORRECTAPPROVED
2012-01-14 16:23:16rev. 1CORRECTAPPROVED
2012-02-09 23:24:16rev. 1CORRECTAPPROVED
2012-03-27 20:55:00rev. 1CORRECTAPPROVED
2012-07-15 03:27:49rev. 1CORRECTNo errors.. okAPPROVED
2012-08-31 19:30:48rev. 1CORRECTAPPROVED
2012-09-02 13:54:57rev. 1CORRECTAPPROVED
2012-09-09 02:39:48rev. 1CORRECTAPPROVED
2012-09-12 13:36:22rev. 1CORRECTAPPROVED
2012-10-06 18:26:40rev. 1CORRECTAPPROVED
2012-11-13 17:52:04rev. 1CORRECTAPPROVED
2013-06-21 20:06:50rev. 2CORRECTAPPROVED
2013-06-29 13:56:20rev. 2ERROR FIXEDThe micro-B plug connector shown in the left picture can't plug in the micro-B receptacle connector in the right picture!APPROVED
2013-07-12 09:26:32rev. 2CORRECTAPPROVED
2013-09-08 23:49:34rev. 2CORRECTAPPROVED
2013-12-08 11:25:32rev. 2CORRECTAPPROVED
2013-12-17 21:45:32rev. 3CORRECTAPPROVED
2013-12-19 07:09:22rev. 3INCORRECTdoes not say if it is front view or back view. If micro B is the cable them to plus in micro A receptacle the pin must be inverted in order to work !APPROVED
2014-07-30 10:21:30rev. 6CORRECTNONEAPPROVED
2014-07-30 10:21:52rev. 6CORRECTNONEAPPROVED
2014-10-09 00:23:09rev. 6CORRECTAPPROVED
2014-11-04 21:46:08rev. 6CORRECTAPPROVED
2015-01-12 04:25:21rev. 6CORRECTcorrectAPPROVED
2015-05-15 16:35:49rev. 6CORRECTAPPROVED
2015-05-28 21:44:01rev. 6CORRECTAPPROVED
2015-10-07 18:24:15rev. 6CORRECTits correctAPPROVED
2015-11-06 09:23:48rev. 6CORRECTAPPROVED
2015-11-07 16:43:25rev. 6CORRECTAPPROVED
2015-12-25 22:38:22rev. 6CORRECTAPPROVED
2016-02-24 12:18:12rev. 6CORRECTAPPROVED
2016-03-24 01:03:04rev. 6CORRECTAPPROVED
2016-09-11 14:14:58rev. 6CORRECTNoAPPROVED
2016-11-20 13:39:10rev. 6CORRECTAPPROVED
2016-12-16 13:33:34rev. 6CORRECTAPPROVED
2017-03-12 15:12:45rev. 6CORRECTAPPROVED
2017-03-19 18:30:35rev. 6CORRECTAPPROVED
2017-06-02 15:14:29rev. 7CORRECTAPPROVED
2017-06-09 08:56:33rev. 7CORRECTAPPROVED
2017-06-16 22:37:31rev. 7CORRECTAPPROVED
2017-11-23 22:11:19rev. 7CORRECTAPPROVED
2017-12-13 23:51:17rev. 7CORRECTAPPROVED
2018-01-07 12:51:05rev. 7CORRECTAPPROVED
2018-04-08 19:43:28rev. 7CORRECTNo error. Checked on Arduino Uno Plus PCB.APPROVED
2018-06-16 04:28:02rev. 11CORRECTAPPROVED
2018-07-09 18:08:49rev. 11CORRECTAPPROVED
2018-11-03 18:27:26rev. 11CORRECTAPPROVED
2018-11-29 07:07:23rev. 11CORRECTAPPROVED
2018-12-30 20:04:27rev. 11CORRECTAPPROVED
2019-02-07 18:20:39rev. 11CORRECTAPPROVED
2019-07-14 08:50:13rev. 11CORRECTAPPROVED
2019-09-21 05:55:52rev. 11CORRECTI made a cable to test based in you data and it worked correctly. Thanks!Spassiba!APPROVED
2020-01-14 18:48:03rev. 11CORRECTAPPROVED
2020-02-07 10:40:04rev. 11CORRECTAPPROVED
2020-07-15 03:15:26rev. 11CORRECTAPPROVED
2020-10-13 00:07:20rev. 11CORRECTAPPROVED
2020-12-28 21:53:14rev. 11CORRECTAPPROVED
2021-01-23 18:50:31rev. 11CORRECTyes!APPROVED
2021-04-30 10:29:09rev. 11CORRECTAPPROVED
2021-08-02 15:38:28rev. 11CORRECTAPPROVED
2022-04-24 02:21:16rev. 12CORRECTYes the writing on this page, check ur spelling APPROVED

History of users contributions

Date Content
Author Comment
2017-02-06 14:13:30rev. 6Kevin BhasiI saw that the ID pin was dark blue on the Micro USB extension cable I cut for a DIY project I was doing, and was confirmed by the visual image but not mentioned on the table.

Back to Micro-USB 2.0 connector pinout

Pinouts.ru > Pinout of Micro-USB connector
should be correct