Nokia Micro USB connector and cable specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 16 approved reports in our database

Date	Content Revision	User opinion	Comment	Approved by moderator?
2010-06-11 16:11:28	rev. 3	INCORRECT		APPROVED
2010-09-18 19:41:52	rev. 4	CORRECT		APPROVED
2010-09-22 07:47:15	rev. 4	CORRECT		APPROVED
2010-09-28 01:02:35	rev. 4	CORRECT		APPROVED
2010-10-27 14:29:14	rev. 5	CORRECT		APPROVED
2010-11-30 17:35:44	rev. 5	CORRECT		APPROVED
2011-01-14 19:58:46	rev. 5	CORRECT		APPROVED
2011-08-23 23:11:16	rev. 7	INCORRECT	The only difference between micro A and B is whether Pin 4 shorted to GND. And the Micro A connector here should be a Micro AB connector.	APPROVED
2011-11-04 08:02:45	rev. 7	CORRECT	ther is no error in the pinout.	APPROVED
2012-01-06 13:24:17	rev. 7	CORRECT	also for Nokia 6500 Slide	APPROVED
2012-03-03 17:04:02	rev. 7	CORRECT		APPROVED
2012-08-20 10:19:17	rev. 7	CORRECT	pin 4 - is ID-bus, used by identify some devises	APPROVED
2012-11-21 20:57:14	rev. 7	ERROR FIXED	Plug drawings are incorrect.	APPROVED
2013-12-16 05:54:46	rev. 7	CORRECT		APPROVED
2016-02-16 05:22:41	rev. 7	CORRECT		APPROVED
2017-02-20 04:14:07	rev. 7	CORRECT		APPROVED

History of users contributions

Date	Content Revision	Author	Comment
2010-06-11 21:39:30	rev. 4	Igor	Pins in plug's are numbered in reversed order
2010-08-01 21:28:10	rev. 4
2010-08-15 20:29:27	rev. 4	Vasja	вешать жабру за одно место!
2010-10-17 14:30:53	rev. 4
2010-10-17 14:31:14	rev. 5	.NetRolller 3D	5320 also uses CA-101
2011-01-21 22:33:56	rev. 5
2011-05-31 22:10:40	rev. 6	Timeon
2011-07-21 18:00:46	rev. 7	Cho
2011-07-21 18:00:58	rev. 7	Cho	Nokia N97 Mini charges from a wall usb charger if both data lines are shortened and connected through a 10KOhm resistor to GND.

Back to Nokia Micro USB connector and cable pinout

Pinouts.ru > Pinout of Micro USB

should be correct