Hardware pinouts information and cables schemes

GPS devices with standard mini-usb interface specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 3 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
ERROR FIXEDHOLUX devices with mini-usb cable
BT GPS GPSSLIM 236
Not USB port, actually TTL Serial port
Pin No.........Holux GPSlim236
1...............VCHARG (power)
2...............RXD (Data in, not USB or RS232)
3...............TXD (Data out, not USB or RS232)
4...............VOUT (3.6v)
5...............GND (power and data)
APPROVED
INCORRECTGarmin Colorado series uses mini-USB connector, however, the charger cable and the data cable are different, so one cannot use the USB cable to connect to a USB wall or car charger.

The other page says it X pin is connected to GND with 17 to 22kOhms. I havent had a chance to verify that, but wanted to clarify. The header says should work with standard mini-usb; it depends what function is intended.
any mini usb cable will do data transfer, not any will do charger.
APPROVED
2012-01-17 11:35:09rev. 3CORRECTAPPROVED


History of users contributions

Date Content
Revision
Author Comment
2008-09-25 21:15:44rev. 3Bill DavisI have used several standard mini-USB cables with my 400t
2011-03-23 14:30:56rev. 3
2012-07-03 16:29:12rev. 3Minor update to description for Mio devices

Back to GPS devices with standard mini-usb interface pinout


Pinouts.ru > Pinout of GPS devices with standard mini-usb interface and layout of 5 pin mini-USB jack connector
unknown