Hardware pinouts information and cables schemes

Secure Digital (SD) card specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 29 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
INCORRECTThe pin6 should be V GNDAPPROVED
CORRECTAPPROVED
CORRECTdoccument apears to be very correctAPPROVED
CORRECTI want to know more, for example, pinout trhough PALM connector, o how to read.APPROVED
INCORRECTPins 6 isnt labeled earth while pin 3 is. Mabye they should both be labeled ground...APPROVED
CORRECTAPPROVED
CORRECTThe pin 3 and pin 6 are connected to GND in my usb adapter device (noganet)APPROVED
CORRECTPins 3 6 are internally connected inside micro card holders so you only need to connect ground to either one of those pinsAPPROVED
2009-06-04 09:37:43rev. 3CORRECTAPPROVED
2009-08-30 22:31:46rev. 3CORRECTAPPROVED
2010-06-20 00:42:06rev. 3CORRECTAPPROVED
2010-07-04 17:39:35rev. 3CORRECTAPPROVED
2010-09-14 04:33:10rev. 3CORRECTAPPROVED
2010-11-06 11:52:19rev. 3CORRECTAPPROVED
2012-08-01 09:24:13rev. 3CORRECTAPPROVED
2012-08-05 01:09:59rev. 3CORRECTAPPROVED
2012-12-26 22:58:16rev. 3CORRECTAPPROVED
2012-12-31 23:38:28rev. 3CORRECTAPPROVED
2013-03-23 14:30:18rev. 3CORRECTAPPROVED
2013-04-24 21:41:52rev. 3CORRECTno errorsAPPROVED
2013-07-21 16:49:55rev. 3CORRECTworks ok with spiAPPROVED
2014-05-12 17:27:56rev. 3CORRECTAPPROVED
2014-06-23 23:42:33rev. 3CORRECTAPPROVED
2014-10-09 12:52:32rev. 3CORRECTN/AAPPROVED
2014-11-17 17:50:49rev. 3CORRECTAPPROVED
2016-02-18 12:28:01rev. 3CORRECTAPPROVED
2019-04-21 01:34:18rev. 3CORRECTAPPROVED
2020-11-12 10:23:29rev. 3CORRECTAPPROVED
2022-10-22 13:40:37rev. 3CORRECTAPPROVED


History of users contributions

Date Content
Revision
Author Comment
2009-03-01 22:30:53rev. 3
2010-01-06 23:11:31rev. 3Cem Berik
2021-06-01 17:03:47rev. 3stefanplease, conect pin sd card, mp3,9pin to usb plug

Back to Secure Digital (SD) card pinout


Pinouts.ru > Pinout of Secure Digital (SD) card and layout of 9 pin SD-card special connector
should be correct