Hardware pinouts information and cables schemes

Subaru OBD II diagnostic connector specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 6 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
2010-01-25 22:06:01rev. 3INCORRECTOnly some model vehicles were CAN in 2006. All models were CAN starting in 2007.APPROVED
2016-09-10 23:20:38rev. 6ERROR FIXEDUSA and Canada 1996-1998(?1999) models Legacy/Outback: OBD-2 style connector, but only SSM protocol allowed. Pin(s): 2;4 (ground) 12;13 (SSMECM communication) 14 (automatic transmission sense/comunication) 16 powerAPPROVED
2017-03-07 19:19:14rev. 6CORRECTAPPROVED
2017-03-07 19:19:57rev. 6CORRECTAbsAPPROVED
2019-09-13 17:43:44rev. 8INCORRECTrotated connector pinout vs Subaru FSMAPPROVED
2022-05-26 20:41:11rev. 8ERROR FIXEDMy Subaru Forester Pin-Outs are as follows: Pin #1 is green and green which is connected to ground any part of the car. Pin # 4 and 5 are tied to ground. Pin # 12 is SSM to ECM signal. Pin # 13 is ECM to SSM signalAPPROVED


History of users contributions

Date Content
Revision
Author Comment

Back to Subaru OBD II diagnostic connector pinout


Pinouts.ru > Pinout of Subaru OBD II diagnostic connector
unknown