Hardware pinouts information and cables schemes

USB 2.0 cable wiring specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 65 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
CORRECTAPPROVED
INCORRECTYour pin-out is wrong for the type B USB connector. I have tested an ordinary type A to type B cable, which works on my HP printer.APPROVED
CORRECTAPPROVED
CORRECTAPPROVED
CORRECTgoodAPPROVED
CORRECTIs correct - Coverted mini into flat USB - all works perfectly (for use with PC to MP3 player).APPROVED
CORRECTIs most certainly correct.APPROVED
INCORRECTPicture with error.
USB A male pins from 1 to 4
and USB A female pins from 1 to 4, but must be from 4 to 1
APPROVED
CORRECTin a pc with multiple USB ports are they just Daisy Chained together without independant siginal buffers isolating devices connected to the computer?APPROVED
CORRECTAPPROVED
CORRECTlolAPPROVED
CORRECTTurn it 180 degree and then you can see that USB picture A is correct. Its fits like a glove. /Albert EAPPROVED
CORRECTAPPROVED
2008-12-11 21:15:18rev. 2CORRECTAPPROVED
2008-12-16 23:08:13rev. 2INCORRECTi would recommend going to www.usb.org and pull the actual document, the whole issue revolves around how you orient the connectors, looking at the USB 2.0 documentation it clears up some of the issues. (be careful, they are viewing the pins from BEHIND the connector, so you would have to invert them to get a pinout image from the front of the connector. APPROVED
2008-12-29 18:08:10rev. 2CORRECTAPPROVED
2009-02-13 00:45:10rev. 2CORRECTAPPROVED
2009-04-24 05:29:06rev. 2CORRECTAPPROVED
2009-08-16 03:42:34rev. 6CORRECTAPPROVED
2009-11-23 13:14:14rev. 6INCORRECTif one side goes 1 2 3 4 pins, when you turn it around, then 5v side goes to gnd and it's all the kaboom... look at the chart :SAPPROVED
2009-12-25 02:26:45rev. 6CORRECTAPPROVED
2010-01-12 11:04:35rev. 6CORRECTAPPROVED
2010-01-20 15:53:21rev. 6CORRECTAPPROVED
2010-01-23 09:02:11rev. 6CORRECTAPPROVED
2010-03-10 23:45:41rev. 6CORRECTAPPROVED
2010-03-31 18:48:53rev. 6CORRECTAPPROVED
2010-04-14 21:40:27rev. 6CORRECTAPPROVED
2010-05-12 17:20:49rev. 6CORRECTAPPROVED
2010-06-16 18:11:12rev. 6CORRECTgreat information, thank youAPPROVED
2010-07-05 05:53:28rev. 6CORRECTAPPROVED
2010-08-09 08:15:52rev. 7CORRECTno errors at all, this was spot onAPPROVED
2010-10-16 23:53:44rev. 8CORRECTCorrectAPPROVED
2010-11-02 15:46:46rev. 9CORRECTAPPROVED
2011-08-29 19:56:41rev. 9CORRECTAPPROVED
2011-09-23 19:42:32rev. 9CORRECTAPPROVED
2011-12-07 17:11:08rev. 9CORRECTAPPROVED
2011-12-23 04:56:21rev. 9CORRECTAPPROVED
2012-02-29 00:51:57rev. 9CORRECTno errorsAPPROVED
2012-03-26 12:55:47rev. 9CORRECTAPPROVED
2012-03-30 17:38:44rev. 9CORRECTAPPROVED
2012-04-22 23:11:39rev. 9CORRECTAPPROVED
2012-05-04 12:31:06rev. 9CORRECTAPPROVED
2012-07-03 17:34:04rev. 9CORRECTAPPROVED
2012-07-23 19:13:38rev. 9CORRECTNo errorsAPPROVED
2012-08-01 06:01:43rev. 9CORRECTAPPROVED
2012-08-16 21:20:26rev. 9CORRECTAPPROVED
2012-08-31 15:10:20rev. 9ERROR FIXEDMINI-A/MINI-B: pin signed 'x' - is USBOTGID pin (OTG ID). 'x' shorted to GND for host mode, N/C for device mode. (Like Micro-A/B)APPROVED
2012-10-23 22:18:01rev. 10CORRECTAPPROVED
2012-11-14 18:41:35rev. 10CORRECTAPPROVED
2012-11-23 13:12:56rev. 10CORRECTnoAPPROVED
2012-11-29 15:17:47rev. 10CORRECTAPPROVED
2013-06-08 12:50:03rev. 10INCORRECTfor mini in schema 1 to 4 2 to x etc, +5v on gnd problemAPPROVED
2013-10-11 17:50:22rev. 11ERROR FIXEDpin numbers of mini/micro connectors are wrongly annotated. 123x4 12345 You may want to check with USB specs: www.usb.org/developers/documents/... APPROVED
2014-01-24 14:47:35rev. 11CORRECTAPPROVED
2015-01-04 23:21:40rev. 11CORRECTAPPROVED
2015-03-14 01:13:18rev. 11CORRECTAPPROVED
2015-04-09 19:26:14rev. 11CORRECTAPPROVED
2015-11-28 04:52:52rev. 11CORRECTcorrectAPPROVED
2016-01-06 19:01:44rev. 11CORRECTAPPROVED
2016-02-25 19:18:20rev. 11CORRECTAPPROVED
2016-06-20 14:13:26rev. 11CORRECTAPPROVED
2018-02-08 04:56:29rev. 12CORRECTAPPROVED
2019-01-30 09:19:46rev. 13CORRECTWould be more easily understood if both photos had the same plug orientationAPPROVED
2019-02-13 03:35:45rev. 13CORRECTAPPROVED
2023-01-17 11:42:40rev. 14CORRECTAPPROVED


History of users contributions

Date Content
Revision
Author Comment
2008-10-20 09:35:41rev. 2
2008-11-27 22:24:00rev. 2
2009-06-20 11:40:44rev. 3Mike
2009-07-10 08:59:52rev. 6
2009-12-22 21:21:39rev. 6
2010-05-10 20:34:43rev. 6SERJnCo
2010-06-19 21:03:44rev. 6Михаил
2010-07-25 11:46:17rev. 7[email protected]Great article
2010-08-23 20:26:48rev. 7Aluminum spelled incorrectly :( sad very sad
2011-03-23 14:32:40rev. 9Pandr
2013-12-15 20:03:25rev. 11

Back to USB 2.0 cable wiring pinout


Pinouts.ru > Pinout of USB cable schematic and layout of 4 pin USB A / USB B / mini-USB jack connector and 4 pin USB A or USB B plug connector
should be correct