Pinouts >  Распиновки разъемов аудио/видео техники
8 pin RJ45 (8P8C) male connector layout
Разъем 8 pin RJ45 (8P8C) male
DMX (Digital MultipleX) is a communications protocol used mainly to control stage lighting.

DMX512 data are transmitted over a differential pair using EIA-485 voltage levels. Network wiring consists of a shielded twisted pair, with a characteristic impedance of 120 Ohms, with a termination resistor at the end of the cable furthest from the controller to absorb signal reflections. 

DMX512-A (ANSI E1.11-2008) allows the use of eight-pin modular (8P8C, or RJ-45) connectors for fixed installations where regular plugging and unplugging of equipment is not required. Cat5 cable, commonly used for networking and telecommunications, has been tested by ESTA for use with DMX512A. Also, cables designed for EIA485 typically meet the DMX512 electrical specifications. 

Pin
Number
Pin
Name
Description
1   Data 1+   Primary Data Link
2   Data 1-   Primary Data Link
3   Data 2+   Optional Secondary Data Link
4   n/a   
5   n/a   
6   Data 2-   Optional Secondary Data Link
7   Signal Common (0 V)   for Data 1
8   Signal Common (0 V)   for Data 2

The 8P8C modular connector pinout matches the conductor pairing scheme used by Category 5 (Cat5) twisted pair patch cables. The avoidance of pins 4 and 5 helps to prevent equipment damage, if the cabling is accidentally plugged into a single-line public switched telephone network phone jack. 

 

Color Kinetics DMX 

It is important to note that the Color Kinetics wiring is completely different than the ESTA standard.

Pin
Number
Pin
Name
Description
1   Signal Common (0 V)   for Data 1
2   Data 1-   Primary Data Link
3   Data 1+   Primary Data Link
4   n/a   
5   n/a   
6   n/a   
7   n/a  
8  n/a    

 

Anolis DMX 

It is important to note that the Anolis wiring is completely different than the ESTA standard.

Pin
Number
Pin
Name
Description
1   n/a  
2   n/a  
3   n/a  
4   n/a   
5   n/a   
6   Data 1+   Primary Data Link
7   Data 1-   Primary Data Link
8   Signal Common (0 V)   for Data 1

 

E:Cue DMX

It is important to note that the E:Cue DMX wiring is completely different than the ESTA standard.

Pin
Number
Pin
Name
Description
1   Data 1-   Primary Data Link
2   Data 1+   Primary Data Link
3   Signal Common (0 V)   for Data 1
4   n/a   
5   n/a   
6   n/a   
7   n/a  
8   n/a  

 

8 pin RJ45 (8P8C) female connector layout
Разъем 8 pin RJ45 (8P8C) female
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings