Pinouts >  Разъемы автомагнитол Subaru, Suzuki  >  Subaru Legacy pinouts
14 pin Head Unit proprietary connector layout
Разъем 14 pin Head Unit proprietary
Clarion. Also for the 2010 Subaru Outback with Macintosh audio with navi

On the 14-pin connector for the power and illumination connections (and speakers in other Subaru models), pin #6 is +12V Battery/constant-on. The term "Back Up" is meant like memory back up, not reverse gear lights.

Also, in most Subaru models, pin 14 is used to provide +12V power to an antenna booster amplifier.  Very few models have a motorized antenna.

Radio reception will be degraded noticeably if the voltage to a Subaru's antenna booster amp falls below 12.0 V.

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

B+ Battery+  (12V direct from Battery). 
GND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ANT+ Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

 

На распиновку Subaru Legacy (2003-2006) Mclntosh PF-40621 есть 3 отзыв(а): 3 положительных и 0 отрицательных.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings