Pinouts >  Разъемы автомагнитол и других мультимедийных устройств автомобиля  >  Pioneer pinouts
16 pin Radio Head Unit proprietary connector layout
Разъем 16 pin Radio Head Unit proprietary

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

B+, BAT, Bup+, Ub+, B-U, MEM +12, KL.30 Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
A+, ACC, S-K, S-kont, SWA, KL.15 Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL, LAMP, Lume, iLLUM, lightbulb image Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT+, P.ANT, ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 
__/ +--- Switched power out

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

MUTE, Mut, mu, TEL, TEL MUTE, strikeout speaker This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
GALA,GAL, GA, SCV, SDV This pin is used in some radio equipment to automatically boost up the volume. It needs the output from the speed sensor.
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings