Pinouts >  Распиновки разъемов аудио/видео техники  >  ATI pinouts
15 pin highdensity D-SUB female connector layout
Разъем 15 pin highdensity D-SUB female
allows to connect ATI VGA to TV SCART. ATI RADEONs and some old Matrox card can generate a

NOT sure it's working.

This connection method to obtain very nice picture quality.

Pin Signal Description
1 15 Red
2 11 Green
3 7 Blue
6 13 Red return
7 9 Green return
8 5 Blue return
9 8 pins 8 and 16 are connected via R=75Ohm
10 17 Composite sync return
13 20 Composite sync
chassis 21 ground
Audio OUT (from soundcard)
jack/1 6  
jack/2 2  
jack/3 4  

There are two different wirings used in SCART sockets found on the backs of TVs. The original SCART socket allowed input of either composite or RGB video. Later, as S-video emerged, an evolved SCART socket began to appear that allowed input of either S or composite video. This scheme requires the use of an RGB-capable SCART socket! Some TV have 3 SCART sockets - the first is a black coloured socket that is wired for composite and RGB video and the others are orange coloured sockets that are wired for S and composite video. Older or lower-end sets with one SCART socket are usually wired for composite and RGB video.

21 pin SCART male connector layout
Разъем 21 pin SCART male
На распиновку ATI Radeon VGA to TV cable есть 2 отзыв(а): 0 положительных и 2 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: www.idiots.org.uk/vga_rgb_scart/, ryoandr.free.fr/
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings