Pinouts >  Acura or Honda OEM Car Audio Head units  >  Honda Civic pinouts
17 pin Honda Head Unit Audio connector layout
17 pin Honda Head Unit Audio connector
at the car stereo
p/n 39101-SNA-A020-M1, ref.n MF726AC
The pinout should fit 2 devices/models. Click to list>

Head unit pinout abbreviations

Pin
Notation		 Pin function

Power pins
BAT+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
 iLLUM Backlight adjustment. +12V supplied to head unit when tail lights ar turned on.
ANT+ Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins
FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL- The corresponding speaker ground

Honda Civic 2006-2011

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
2 Information source(s)
Honda Civic (2006-2011) 2AEO Head Unit visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings