Pinouts >  KIA and Hyundai OEM Car Audio Head units  >  Hyundai Sonata pinouts
18 pin Kia Head Unit A connector layout
18 pin Kia Head Unit A connector
p/n 96560-3Q000 (AVN-600YFPL)

Pin No. Connector A Connector B
  Description Remarks Description Remarks
1  - - CAN H Used for CAN network
2  - -  -  -
3  - -  -  -
4  - - Steering remote control Steel wheel remote control input
5 SP DIF ground To EXT AMP  -  -
6 SP DIF (+) To EXT AMP  -  -
7 ALT ALT L  -  
8 Illumination (+) Rheostat from vehicle (+) AUX input (RH) AUX ST Sound R-CH Input
9 R Position R Signal AUX Ground AUX ST sound ground
10  - - MIC+ (Bluetooth) Bluetooth hand free
11  - - ACC (+) ACC
12 NAVI AMP (-) Used for voice recognition Battery (+) Fused battery power supply (10A)
13 NAVI AMP (+) Used for voice recognition CAN L Used for CAN NETWORK
14  -   Auto right Auto right signal input
15 SP DIF (-) To EXT AMP P Position P Position(TGS) signal from vehicle
16 DOOR Door unlock signal Speed Speed signal from vehicle
17 Illumination (-) Rheostat from vehicle (-) Steering remote ground Steel wheel remote control input
18 Remote antenna Remote supply for motorised antenna  -  -
19    -  -
20 AUX DETECT AUX connection DETECT
21 AUX input (LH) AUX ST SOUND L-CH Input
22 MIC- (Bluetooth) Bluetooth hand free
23 Ground Ground
24 Ground Ground

Alternative

No Terminal Description Condition Specified Condition
B1 CAN High Engine switch on(ACC) Approx. 5V level Communication
B4 Steering Wheel Remote Control Steering Wheel switch pushed 0.5V ~ 3V
B7 AUX Video Signal External Auxiliary device is Video Playing
(At time of Aux jack use)
1 Vpp Video Signal Input
B8 AUX Right Sound Signal External Auxiliary device is Audio playing
(At time of Aux jack use)
A waveform synchronized with sound is output
B9 AUX Reference Ground Always Below 1 ohm
B10 MIC+ Input the Voice Signal via MIC A waveform synchronized with Voice data via MIC
B11 Accessory Engine switch on(ACC) 11 ~ 14 V
B12 Battery Always 11 ~ 14 V
B13 CAN Low Engine switch on(ACC) 5V level Communication
B14 Auto Light Auto Light Sensor is detected  3.3V(High) → 0V(Low)
B15 Parking Positon Engine switch on(IGN), Shift tansmission is Parking Position 0V(Low) → 14V(High)
B16 Speed Sensor Signal Engine switch on(IGN), car is moved slowly Approx. 5V Level Pulse Generation
B17 Steering Wheel Remote Control Gnd Always Below 1 ohm
B19 AUX Video Signal Ground Always Below 1 ohm
B20 AUX Signal Input Detect Auxiliary device is inserted 0V(Low) → 5V(High)
B21 AUX Left Sound Signal External Auxiliary device is Audio playing
(At time of Aux jack use)
A waveform synchronized with sound is output
B22 MIC- Input the Voice Signal via MIC A waveform synchronized with Voice data via MIC
B23 Ground Always Below 1 ohm
B24 Ground Always Below 1 ohm
24 pin Kia Head Unit B connector layout
24 pin Kia Head Unit B connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Hyundai Sonata (2011-2014) Navigation Head Unit visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings