Pinouts >  Genuine Mazda Car audio Head Units  >  Mazda pinouts
CQ-EM4770AT, GS1F669RXA

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

B+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
 iLLUM Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

MUTE This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
CAN-L, CAN-H CAN on board diagnostic bus

Battery Constant 12V+ Wire: Orange/Black
Accessory Switched 12V+ Wire: Blue/Black
Left Front Speaker Positive Wire (+): White/Black
Left Front Speaker Negative Wire (-): Gray/Black
Right Front Speaker Positive Wire (+): White/Red
Right Front Speaker Negative Wire (-): Gray/Red
Left Rear Speaker Positive Wire (+): White/Violet
Left Rear Speaker Negative Wire (-): Gray/White
Right Rear Speaker Positive Wire (+): White
Right Rear Speaker Negative Wire (-): Gray

There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Mazda 6 Bose (2007-2011) Car Stereo visual pinout:
Mazda 6 Bose (2007-2011) Car Stereo diagram
click to enlarge
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.