Connector A
| Pin Num |
Signal |
|---|---|
| 1 | Right Rear audio + |
| 2 | Right front audio + |
| 3 | Left front audio + |
| 4 | Left Rear audio + |
| 5 | Right Rear audio - |
| 6 | Right front audio - |
| 7 | Front Left audio - |
| 8 | Rear Left audio - |
| 10 | data CAN High |
| 11 | +12 v switched remote - the signal output to activate external devices (amp) |
| 12 | battery +12 volt power supply in |
| 13 | CAN data low |
| 14 | external mute - input signal to mute the music, such as the handsfree |
| 16 | ground - "mass" of the unit |
Connector B
| Pin Num |
Signal |
|---|---|
| 1 | audio right AUX 2 |
| 2 | audio ground AUX 2 |
| 4 | audio right AUX 1 - right channel AUX input |
| 7 | audio left AUX 2 |
| 9 | Not used (microphone) |
| 10 | audio left AUX 1 - left channel AUX input |
| 11 | audio ground AUX 1 - "earth" AUX input |
Connector C
| Pin Num |
Signal |
|---|---|
| 1 | ground CDC (cd-Changer) |
| 2 | data CAN low CDC |
| 3 | + battery CDC |
| 4 | Right audio CDC |
| 7 | CAN data High |
| 8 | audio ground CDC |
| 10 | audio left CDC |
Omitted pins are Not Connected.
Alternative pinout
|
pin |
main |
B |
C |
|---|---|---|---|
|
1 |
RR+ |
FAN N |
GND |
|
2 |
RF+ |
CALL SP E- |
- |
|
3 |
LF+ |
MIC - |
CDC +B |
|
4 |
LR+ |
AUX R |
CDC R |
|
5 |
RR- |
CAN L |
- |
|
6 |
RF- |
DISP ON/OFF |
VAN DATA/ |
|
7 |
LF- |
FAN P |
- |
|
8 |
LR- |
CALL SP E+ |
CDC signal GND |
|
9 |
+ DISP |
MIC + |
- |
|
10 |
VAN DATA H |
AUX L |
CDC L |
|
11 |
SW. 14V |
AUX audio GND |
VAN DATA |
|
12 |
+12V BU |
CAN H |
+ VAN |
|
13 |
VAN DATA N |
x |
x |
|
14 |
+VAN DISP |
x |
x |
|
15 |
GND |
x |
x |
|
16 |
GND |
x |
x |
correct
incorrect