Pinouts >  Genuine Subaru and Suzuki car audio harness  >  Subaru Forester pinouts
14 pin Head Unit proprietary connector layout
14 pin Head Unit proprietary connector
p/n 86201SA021, 86201SA020, Subaru P121 (Matsushita CQ-JF1910), PF-2343I-A (clarion), RF-2125I and many others
The pinout should fit 6 devices/models. Click to list>

Pin
#

Function

1998-2007 Subaru Forester Factory Radio Connector
Wire Color (wires go to Forester's Speakers, etc.)

Column B
Subaru After-market Harness
Wire Color
(EIA Standard)
1 Illumination+ Violet Orange
2 Right Front Speaker + Red / Yellow Gray
3 Left Front Speaker + Brown / White White
  (gap for connector lock)
4 Right Rear Speaker + Blue / Yellow Violet
5 Left Rear Speaker + White / Red Green
6 +12 Volt Memory Blue / Red Yellow
 
7 Dimmer (Illum.-) Orange / White Orange / White
8 Right Front Speaker - White / Black Gray / Black
9 Left Front Speaker - Green White / Black
  (small gap)
10 +12 Volt Accessory Yellow / Green Red
11 Ground Black; Black / Red (for 2003-2007) Black
  (small gap)
12 Right Rear Speaker - Red / White Violet / Black
13 Left Rear Speaker - Red / Black Green / Black
14 Power Antenna +

See Note 1

 Blue

Note 1. Power antenna wire color: 1999: Blue / White (to Antenna Booster Amplifier); 
1998, 2000, 2001: NC (Note: 2000 & 2001 do have an antenna amplifier, but it is connected directly to +12 Volt Accessory power)
2002: Blue / Red (to Antenna Amplifier)
2003-2007: Blue / White (to Antenna Amplifier)

Note 2: Color coding: main color/stripe color

Pinout status: +13 -0
According to 13 reports in our database (13 positive and 0 negative) the Subaru Forester (1993-2008) Car Stereo pinout should be correct.

Is this pinout
NO DIY devices
1 Information source(s)
Subaru Forester (1993-2008) Car Stereo visual pinout:click to enlarge
Copyright © 2000-2025 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings