Pinouts >  Genuine Subaru and Suzuki car audio harness  >  Subaru pinouts
14 pin Head Unit proprietary connector layout
14 pin Head Unit proprietary connector
The pinout should fit 3 devices/models. Click to list>

 

Pin
#

Function

Legacy / Outback / Baja Factory Radio Connector Wire Color (wires go to car's Speakers, etc.)

Subaru After-market Harness Wire Color (EIA Standard)
    1993-1994 1995-1999 2000-2004 2005-2008  
1 Illumination+   White / Green Violet Orange
2 Right Front Speaker +   Red / Yellow Gray
3 Left Front Speaker +   Brown / White White
  (gap for connector lock)
4 Right Rear Speaker +   Blue / Yellow Violet
5 Left Rear Speaker +   White / Red Green
6 +12 Volt Memory   Blue / Red Yellow
 
7 Dimmer (Illum.-)   Yellow / Blue Black / White Orange / White
8 Right Front Speaker -   White / Black Gray / Black
9 Left Front Speaker -   Green White / Black
  (small gap)
10 +12 Volt Accessory   Yellow Yellow / Green Yellow / Red

2005 Baja: Yellow / Green		 Red
11 Ground   Black Black
  (small gap)
12 Right Rear Speaker -   Red / White Violet / Black
13 Left Rear Speaker -   Red / Black Green / Black
14 Power Antenna +   Green / Orange
(to motorized antenna)		 Green
(to Antenna Amplifier)		 Yellow / Black
(to Antenna Amplifier)

2005 Baja: Green		 Blue

 

Pinout status: +2 -0
According to 2 reports in our database (2 positive and 0 negative) the Subaru Legacy, Outback, Baja (1993-2008) Car Stereo pinout should be correct.

Is this pinout
NO DIY devices
1 Information source(s)
Subaru Legacy, Outback, Baja (1993-2008) Car Stereo visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings