Pinouts >  Genuine Porsche or Volkswagen Head units  >  Volkswagen pinouts
52 pin Volkswagen Quadlock connector layout
52 pin Volkswagen Quadlock connector
at the head unit
Not Tested!

 

Pin
Number
Function
1 Rear right treble loudspeaker +
Rear right bass loudspeaker +
2 Front right treble loudspeaker +
Front right bass loudspeaker +
3 Front left treble loudspeaker +
Front left bass loudspeaker +
4 Rear left treble loudspeaker +
Rear left bass loudspeaker +
5 Rear right treble loudspeaker -
Rear right bass loudspeaker -
6 Front right treble loudspeaker -
Front right bass loudspeaker -
7 Front left treble loudspeaker -
Front left bass loudspeaker -
8 Rear left treble loudspeaker -
Rear left bass loudspeaker -
17 Terminal 31
18 Terminal 30

B connector 

Pin
Number
Function
1 Telephone microphone
6 Reversing camera
7 Telephone microphone , screening connection
12 Reversing camera

C connector 

Pin
Number
Function
1,2,3,7,8 Interface for external multimedia unit or Connection for external audio sources
3 Interface for external multimedia unit or Connection for external audio sources or USB Hub
5,6,9,10,11,12 Interface for external multimedia unit

 

D connector 

Pin
Number
Function
1 Connection 1 (infotainment CAN bus, high) in main wiring harness
2 Display unit for front information display and operating unit control unit
5 Terminal 30
6 Connection (infotainment CAN bus, high), in dash panel wiring harness
7 Connection 1 (infotainment CAN bus, low) in main wiring harness
8 Display unit for front information display and operating unit control unit
12 Connection (infotainment CAN bus, low), in dash panel wiring harness
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Volkswagen E-Golf (2014-2016) Discover Pro Head Unit visual pinout:click to enlarge
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.