Pinouts >  Aftermarket automotive Head units and Car Stereo  >  JVC pinouts
22 pin JVC receiver QAM1436 proprietary connector layout
22 pin JVC receiver QAM1436 proprietary connector
at the head unit
JVC wiring harness part number QAM1436-001 used with KW-NT300, KW-NT500HDT, KW-NT700 and KW-NT800HDT receivers

 

Pin
Number		 Harness
Wire Color		 Description
1 Black Chassis ground
2 Red +12v switched
3 Blue w/white stripe Remote out
4 Blue Power antenna
5 Pink Speed signal
6 N/A Not used
7 N/A Not used
8 Gray Right front +
9 Gray w/black stripe Right front -
10 White w/black stripe Left front -
11 White Left front +
12 Yellow +12v constant
13 Orange w/white stripe Illumination control
14 N/A Not used
15 N/A Not used
16 N/A Not used
17 Light green Parking brake
18 Purple w/white stripe Reverse gear signal
19 Purple Right rear +
20 Purple w/black stripe Right rear -
21 Green w/black stripe Left rear -
22 Green Left rear +

 

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
JVC head units QAM1436-001 visual pinout:click to enlarge
Source(s) of this and additional information: http://resources.jvc.com/Resources/00/01/52/LVT2276-002A.pdf
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings