Pinouts >  Cars, Bikes and Trucks Diagnostic Link Connectors (DLC)  >  Mercedes pinouts
16 pin J1962 OBD-2 car diagnostic connector layout
16 pin J1962 OBD-2 car diagnostic connector
at the Mercedes car
Used in models produced before 2000, only good for emissions testing and clearing.

 

Device 1
Pin Number		 Device 1
Pin Name		 Description
1 Manufacturer specific  
2 J1850 bus+ J1850 bus+
3 Manufacturer specific  
4 Chassis ground Chassis ground
5 Electronic ground Electronic ground
6 CAN high (J-2284) CAN high (J-2284)
7 ISO 9141-2 K output ISO 9141-2 K output
8 Manufacturer specific  
9 Manufacturer specific  
10 J1850 bus J1850 bus
11 Manufacturer specific  
12 Manufacturer specific  
13 Manufacturer specific  
14 CAN low (J-2284) CAN low (J-2284)
15 ISO 9141-2 L output ISO 9141-2 L output
16 Battery voltage Battery voltage

Omitted pins are Not Connected.

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings