Pinouts >  Cars, Bikes and Trucks Diagnostic Link Connectors (DLC)  >  Honda pinouts
used in all Honda car before 2001

 Two connectors are used - with 3 pins and with 2 pins.

This image belongs to my HONDA CIVIC FASTBACK Gen VI 1.5i VTEC year 1997, D15Z8 engine. The car was.assembled in UK. The pugs are hidden, placed in the right side under the gloves-box, passenger's feet well.

To use an OBD2A 16 pins plug I have to built a cable with

pin 1 --> pin 5 (maybe chassis --> pin 4 externally); pin 2 --> pin 16; pin 5 --> pin 7, regarding first the 5 pins plugs and then the 16 pins plug. By now, forget pins 3 and 4 of 5 pins plug by now, because they deal with ABS and not even every models have brakes with ABS system.

In a car with 3+2 pins plugs, 1 --> 5; 2 --> 16 and 3 --> 7, regarding first the 3 pins and then the 16 pins plugs

Pin
Number
Pin
Name
Description (may be empty)
1 GND  Ground
2 +12V  Battery power
  L-Line  ABS self-diagnostic(slow codes)
  K-Line   Diagnostic(ABS)
5 K-line   Diagnostic(ECU)
2-pin connector
4    self-diagnostic codes
5    self-diagnostic codes

 

According to 1 reports in our database (1 positive and 0 negative) the Honda old 3+2 pin diagnostic connector pinout should be correct.

Is this pinout
Honda old 3+2 pin diagnostic connector visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings