Cars, Bikes and Trucks Diagnostic Interfaces  > Interfaz pinouts

In the bus, the bushing is for the connection at the Boardcomputer in the Lenksule about 30cm beneath the steering wheel behind a simple plastic lid. Flight the dimensions determines can go off and then it: I decided on a simple solution, with which material costs in height occur of  2.51. For that one can do handicrafts then to be sure theoretically 10 connectors, for it gives the components only in the 50er bag. 

Pin name Description
1 NC  
2 J1850 bus +  
3 NC  
4 Vehicle mass  
5 Signal mass  
6 CAN High (J-2284)  
7 ISO 9141-2 K exit  
8 NC  
9 NC  
10 J1850 bus  
14 CAN Low (J-2284)  
15 ISO 9141-2 L exit  
16 Battery-tension + 12V  
16 pin J1962 OBD-2 car proprietary of Interfaz OBD2 Connector connector layout
16 pin J1962 OBD-2 car proprietary connector
According to 1 reports in our database (1 positive and 0 negative) this pinout should be correct.

Is this pinout
Interfaz OBD2 Connector visual pinout:
Interfaz OBD2 Connector diagram
click to enlarge
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.