Pinouts >  Cars, Bikes and Trucks Diagnostic Link Connectors (DLC)  >  Volvo pinouts
16 pin J1962 OBD-2 car diagnostic connector layout
16 pin J1962 OBD-2 car diagnostic connector
for all after 1996 models
The pinout should fit 21 devices/models. Click to list>

 

Pin Signal Description
2 J1850 Bus+  
3   Low speed CAN - high
4 CGND Chassis ground
5 SGND Signal ground
6 CAN High J-2284 High speed CAN
7 K-LINE (ISO 9141-2 and ISO/DIS 14230-4) ABS, DSA, TCU AW, IMMOB, ECC
10 J1850 Bus-  
11 ISO 9141 K-LINE ECU, Fenix 5.1 (Volvo S40 and some others), Low speed CAN - low
13   Cruise-control
14 CAN Low J-2284 High speed CAN
15 ISO 9141-2 L-LINE (ISO 9141-2 and ISO/DIS 14230-4) Motor
16 +12v Battery power

 

Volvo OBD-2 compatibility list

Note that list is not 100% complete!

Model Engine Year (starting from) OBD-2 Protocol
Volvo 850 Gasoline (143 HP) 1995  
Gasoline (141 HP) 1995  
Gasoline (188 HP) 1995  
Gasoline (125 HP) 1996  
Gasoline (163 HP) 1997  
  1997 ISO 14230-4, ISO 9141-2
Gasoline (223 HP) 1995  
Volvo 850 Turbo   1996 ISO 14230-4, ISO 9141-2
Volvo 855 GLT Gasoline (171 HP) 1997 ISO 9141-2 
Volvo 940 Gasoline (135 HP) 1998  
Volvo 960 2,5l , Gasoline (228 HP) 1995 ISO 9141-2 
Volvo C30 2.4 D5, Diesel (180HP) 2007 CAN 29bit
Diesel (135 HP) 2007 CAN 
Volvo C70 2.4, Gasoline (140HP) 2006 CAN 29bit
Volvo S 60 Gasoline (198 HP) 2001 ISO 9141-2 
D5, Diesel (161 HP) 2003  
Volvo s 80 Diesel (160 HP) 2003  
Volvo S40 2.0T, Gasoline (163HP) 1998 ISO 9141
Gasoline (159 HP) 1999 ISO 9141-2 
  2000 ISO 14230-4, ISO 9141-2
1.9, Diesel (115HP) 2001 ISO 9141
Diesel (135 HP) 2004  
Gasoline (168 HP) 2005  
Gasoline (135 HP) 2005  
Gasoline (124 HP) 2000  
Volvo S60   2001 ISO 14230-4, ISO 9141-2
2.4T, Gasoline (198 HP) 2003  
2.5 D5, Diesel (163HP) 2004 CAN 29bit
2.4 D, Diesel (130HP) 2005 CAN 29bit
Volvo S70 Gasoline (161 HP) 2000 ISO 9141-2 
1999,  - ISO 14230-4, ISO 9141-2
Volvo S80   1999 ISO 14230-4, ISO 9141-2
Gasoline (139 HP) 2001 ISO 9141-2 
Gasoline (139 HP) 2002  
2.4, Diesel (163HP) 2005 CAN 29bit
Volvo V 40 2,0 TURBO, Gasoline (159 HP) 1998 ISO 14230-4, ISO 9141-2
2.0 T, Gasoline (159 HP) 1998 -
Volvo V 70 XC Gasoline (202 HP) 1998 ISO 14230-4, ISO 9141-2
Volvo V40 Gasoline (148 HP) 1998  
Diesel (94 HP) 1999 ISO 14230-4, ISO 9141-2
Diesel (101 HP) 1999 ISO 14230-4, ISO 9141-2
Gasoline (121 HP) 1999 ISO 9141-2 
Gasoline (127 HP) 1999  
2.0 T, Gasoline (159 HP) 1999 ISO 14230-4, ISO 9141-2
1.9 turbo, Gasoline (200HP) 1999 ISO 9141
Diesel (114 HP) 2000  
Gasoline (198 HP) 2000  
Diesel (114 HP) 2000 ISO 9141-2 
Gasoline (121 HP) 2001 PWM J1850 
1.8 122PS, Gasoline (121 HP) 2003 ISO 9141-2 
Gasoline (198 HP) 1998  
Volvo V50 2.0 HDi, Diesel (136HP) 2004 CAN 29bit
Gasoline (139 HP) 2005  
Volvo V70 Gasoline (141 HP) 1997  
Gasoline (194 HP) 1997 ISO 9141-2 
Gasoline (191 HP) 1998 ISO 9141-2 
  1998 ISO 14230-4, ISO 9141-2
Gasoline (183 HP) 1998 ISO 9141-2 
TDI, Diesel (139 HP) 1998 KW 1281 
Gasoline (139 HP) 1999 ISO 14230-4, ISO 9141-2
Gasoline (168 HP) 2000 ISO 9141-2 
T5, Gasoline (250HP) 2000 ISO 9141
2.4 Turbo, Gasoline (200HP) 2001 ISO 9141
2.3, Gasoline (250HP) 2001 ISO 9141
2.5, Diesel (130HP) 2004 ISO 9141
Gasoline (198 HP) 2000 ISO 9141-2 
  2000 ISO 14230-4, ISO 9141-2
Gasoline (282 HP) 2004 ISO 9141-2 
Gasoline (191 HP) 1997 ISO 9141-2 
  2002 ISO 14230-4, ISO 9141-2
Diesel (155 HP) 2003  
Gasoline (237 HP) 1998 ISO 9141-2 
Gasoline (198 HP) 2000 ISO 9141-2 
Gasoline (198 HP) 2001 ISO 9141-2 
Gasoline (257 HP) 2006 CAN 
Gasoline (191 HP) 1998 ISO 9141-2 
Gasoline (192 HP) 1999 ISO 9141-2 
Volvo XC60 2, Gasoline (204HP) 2011 CAN 11bit (500kb)
Volvo XC70 2.4, Diesel (163HP) 2005 CAN 29bit
3.2, Gasoline (170HP) 2008 CAN 11bit (500kb)
Volvo XC90 D5, Diesel (163HP) 2003 ISO 9141
2.4, Diesel (163HP) 2005 CAN 29bit
2.4, Diesel (185HP) 2006 CAN 29bit
2.4 D5, Diesel (185HP) 2007 CAN 29bit

OBD protocols used:

1996-2004: ISO 9141

2005 and later: CAN


 

Some OBD-II cables schemes:

OBD-2 ISO 9141-2 (14230-4, KWP2000) simple serial cable
OBD-2 J1850 PWM, J1850 VPW serial ELM327 cable
OBD-2 universal ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 diagnostic cable

center

Pinout status: +1 -0
According to 4 reports in our database (1 positive and 0 negative) the Volvo OBD II diagnostic connector pinout should be correct.

Is this pinout
1 Related pinout(s)
NO DIY devices
Volvo OBD II diagnostic connector visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings