Pinouts >  Разъемы сотовых телефонов и смартфонов  >  Pantech pinouts
24 pin Pantech cell phone proprietary connector layout
Разъем 24 pin Pantech cell phone proprietary
Full pinout for Pantech C300, G300, G600, G700, G800, G900, GB100, GB200, GB300, GF200, GF500, PG1200, PG1400, PG1500, PG3000, PG3200, PG3500, PG3600, PG6100, PG8000. Used in almost all Pantech phones?
Pin Function
1 +Vcharge
2 +Vcharge
3 CTS / IO / USC5
4 RTS / CLK / USC4
5? FS / RI / USC3
6 +Vbat
7 +Vbat
8? ACCIDENT / USB Data+
9? FS / RI / USC6
10 RX / CTS / GPIO_1
11 TX / RTS / GPIO_3
12 TXD / TX / USC2
13 POWERON. Connect to GND for autostart phone.
14? ACCDETECT / USB Data-
15 RXD / RX / USC1
16 CLK / USC0
17 JTAGEN - For activation connect to Vbat.
18 TDI / DAI1 / GPIO20
19 TDO / DAI0 / GPIO21
20 TMS / DAIRESET / GPIO19
21 TCK / HSLDO0 / GPIO18
22 GND
23 GND
24 GND

Newer Pantech cell phones may be connected to computer with simple USB cable. +Vcharge to PC USB Vcc, pin 8 to USB Data+, Pin 14 to USB Data-, GND to USB GND. Should work with Pantech PG-6100 and may be some others

Pins 3,4,6,7,11,12,15,16,22,23,24 are used in serial data-cable
Pins 6,7, 10,11,12,15,16,22,23,24 are used for JTAG (hi level specification by Analog Device)

На распиновку Pantech C300, G300, G600, G700, G800, G900, GB100, GB200, GB300, GF200, GF500, PG1200, PG1400, PG1500, PG3000, PG3200, PG3500, PG3600, PG6100, PG8000 cell phones cable connector есть 6 отзыв(а): 5 положительных и 1 отрицательных.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings