Pantech 24 pin cable connector pinout signals @ PinoutGuide.com

Full pinout for Pantech C300, G300, G600, G700, G800, G900, GB100, GB200, GB300, GF200, GF500, PG1200, PG1400, PG1500, PG3000, PG3200, PG3500, PG3600, PG6100, PG8000. Used in almost all Pantech phones?

Pin	Function
1	+Vcharge
2	+Vcharge
3	CTS / IO / USC5
4	RTS / CLK / USC4
5?	FS / RI / USC3
6	+Vbat
7	+Vbat
8?	ACCIDENT / USB Data+
9?	FS / RI / USC6
10	RX / CTS / GPIO_1
11	TX / RTS / GPIO_3
12	TXD / TX / USC2
13	POWERON. Connect to GND for autostart phone.
14?	ACCDETECT / USB Data-
15	RXD / RX / USC1
16	CLK / USC0
17	JTAGEN - For activation connect to Vbat.
18	TDI / DAI1 / GPIO20
19	TDO / DAI0 / GPIO21
20	TMS / DAIRESET / GPIO19
21	TCK / HSLDO0 / GPIO18
22	GND
23	GND
24	GND

Newer Pantech cell phones may be connected to computer with simple USB cable. +Vcharge to PC USB Vcc, pin 8 to USB Data+, Pin 14 to USB Data-, GND to USB GND. Should work with Pantech PG-6100 and may be some others

Pins 3,4,6,7,11,12,15,16,22,23,24 are used in serial data-cable
Pins 6,7, 10,11,12,15,16,22,23,24 are used for JTAG (hi level specification by Analog Device)

According to 6 reports in our database (5 positive and 1 negative) the Pantech 24 pin cable connector pinout should be correct.

Is this pinout

correct

incorrect

If you did publish instruction for Do-It-Yourself device with this pinout, share the link with us.

Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.

mobile phone connector and cable pin assignment

Pantech 24 pin cable connector pins and signals